Setting Maximum Calls per Sec
2 posters
Page 1 of 1
Setting Maximum Calls per Sec
I have a problem during my busy hour when some of my customers flood my switch with calls. My SS7 CPU link utilization goes to 100% ( I have two 56K links). I thought if I set some limits on Max Call / Sec that would help to not overrun my SS7 links. I believe this parameter is only used during call setup, and not applicable after the call is connected.
My problem is I dont know what value to use or how to calculate a value based on my switch config and trunking. Any thoughts as to how to calculate this value???
thanks Ron
My problem is I dont know what value to use or how to calculate a value based on my switch config and trunking. Any thoughts as to how to calculate this value???
thanks Ron
rogro- Number of Messages : 2
Point : 6
Registration Date : 2018-06-21
Re: Setting Maximum Calls per Sec
Hi Rogro
This forum is dedicated to Telcobridges SBC products. Please send an email to support@telcobridges.com for SS7 based Gateway products.
This forum is dedicated to Telcobridges SBC products. Please send an email to support@telcobridges.com for SS7 based Gateway products.
Similar topics
» How about calls originated outside NorthAmerica? (these countries won´t follow this STIR/SHAKEN protocol) Are these calls all be treated as "possible spoofed CLI" calls?
» Inbound calls are working but outbound calls are failing for SIP Trunk
» Multiple SIP Transport Server using same IP but different port and limit of a maximum number of transport servers in the configuration.
» How do you trap calls on SIP trunks - TDM is easy to do and provide from the carrier - What about SIP threats - like bomb threats, harrassing calls
» Problem with setting up a new NAP
» Inbound calls are working but outbound calls are failing for SIP Trunk
» Multiple SIP Transport Server using same IP but different port and limit of a maximum number of transport servers in the configuration.
» How do you trap calls on SIP trunks - TDM is easy to do and provide from the carrier - What about SIP threats - like bomb threats, harrassing calls
» Problem with setting up a new NAP
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum