What's new in release 3.0.72
Page 1 of 1
What's new in release 3.0.72
================================
What's new in release 3.0.72
================================
Issues fixes:
#22697 - Call has no audio when RTP loopback is used and payload type changes are received
#22706 - Keep the original NAP name (lower/upper case) in the CDR
#22730 - ISDN backup D channel DOWN, but everything looks green on the status
================================
What's new in release 3.0.71
================================
Issues fixes:
#22677 - Upgrade from 2.10.30 to 3.0.57 stuck
#21283 - Configure TMG to bridge SS7 and Sigtran via SCCP
#22707 - Cannot allocate VP group because port speed is different
#22418 - Automatically detect loopback RTP and disable remote NAT traversal option
================================
What's new in release 3.0.70
================================
Enhancements:
#22238 - Deploy SBC services on AWS (Amazon Web Services)
#22615 - Support SIP IPs in the CDR logs
#22632 - Support remote NAT traversal for SIP phones unaware that they are behind a NAT
Issues fixes:
#22638 - Management port not accessible after adding a new VM interface
#22641 - SNMP always show 10Mbps link speed for ETH interfaces
================================
What's new in release 3.0.58
================================
Issues fixes:
#22538 - Fail to activate configuration after upgrade from 2.6.60 to 2.9.87
#22590 - NFAS trunks are misaligned after reordering in the configuration
#22608 - qop in Authorization header containing parenthesis not consistent to RFC2617
What's new in release 3.0.72
================================
Issues fixes:
#22697 - Call has no audio when RTP loopback is used and payload type changes are received
#22706 - Keep the original NAP name (lower/upper case) in the CDR
#22730 - ISDN backup D channel DOWN, but everything looks green on the status
================================
What's new in release 3.0.71
================================
Issues fixes:
#22677 - Upgrade from 2.10.30 to 3.0.57 stuck
#21283 - Configure TMG to bridge SS7 and Sigtran via SCCP
#22707 - Cannot allocate VP group because port speed is different
#22418 - Automatically detect loopback RTP and disable remote NAT traversal option
================================
What's new in release 3.0.70
================================
Enhancements:
#22238 - Deploy SBC services on AWS (Amazon Web Services)
#22615 - Support SIP IPs in the CDR logs
#22632 - Support remote NAT traversal for SIP phones unaware that they are behind a NAT
Issues fixes:
#22638 - Management port not accessible after adding a new VM interface
#22641 - SNMP always show 10Mbps link speed for ETH interfaces
================================
What's new in release 3.0.58
================================
Issues fixes:
#22538 - Fail to activate configuration after upgrade from 2.6.60 to 2.9.87
#22590 - NFAS trunks are misaligned after reordering in the configuration
#22608 - qop in Authorization header containing parenthesis not consistent to RFC2617
Similar topics
» What's new in release 3.0.77
» What's new in release 3.1.81
» What's new in release 3.1.123
» What's new in release 3.1.134
» What's new in release 3.0.78
» What's new in release 3.1.81
» What's new in release 3.1.123
» What's new in release 3.1.134
» What's new in release 3.0.78
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum