SNMP scanners
Page 1 of 1
SNMP scanners
by lmorissette Thu Jul 25, 2024 1:58 pm
We have seen recently SNMP scanners probing for opened port 161 on the internet.
Possible solutions for ProSBC (and TMG) to prevent being scanned:
1. Disable SNMP if you are not using it: Enabling SNMP
2. Use SNMPv3 with user/password: Adding SNMPv3 user
3. Change the default port from 161 to another one: SNMP Port Configuration
4. Change the default public/private community names: SNMP community names
Possible solutions for ProSBC (and TMG) to prevent being scanned:
1. Disable SNMP if you are not using it: Enabling SNMP
2. Use SNMPv3 with user/password: Adding SNMPv3 user
3. Change the default port from 161 to another one: SNMP Port Configuration
4. Change the default public/private community names: SNMP community names
lmorissette- Number of Messages : 45
Point : 89
Registration Date : 2017-11-27
Similar topics» Can I do the settings so that doesn’t send the `tbNp1State` SNMP trap message or Can I disable any SNMP trap notification from SNMP?
» Doubt about SIP scanners and ProSBC
» [SNMP] OID version
» SNMP / Notification when DDOS_PROTECTION is triggered
» ProSBC TechTraining - 355 - SNMP and other topics
» Doubt about SIP scanners and ProSBC
» [SNMP] OID version
» SNMP / Notification when DDOS_PROTECTION is triggered
» ProSBC TechTraining - 355 - SNMP and other topics
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum