Telcobridges - Session Border Controllers
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Freesbc and CUCM

2 posters

Go down

Freesbc and CUCM Empty Freesbc and CUCM

Post by freedomhtx Wed Nov 04, 2020 9:15 am

Hi there, I am having an issue making and receiving calls through my Callmanager. Has anyone successfully setup this SBC with callmanager? Im trying to set this up in a lab environment. The SBC will successfully make a call through the trunk to the SIP provider but I cannot make or receive a call through my CUCM. Plz help.

freedomhtx

Number of Messages : 4
Point : 8
Registration Date : 2020-11-04

Back to top Go down

Freesbc and CUCM Empty Re: Freesbc and CUCM

Post by Admin Wed Nov 04, 2020 9:17 am

Hi

Would you check if CUCM sending the calls to the correct NAP port which you configured under the NAP, please? You can use tbsigtrace capture and make a test call and analyze the signaling trace. You can find more details about tbsigtrace in the following link;
https://docs.telcobridges.com/tbwiki/Toolpack_Debug_Application:Tbsigtrace

Admin
Admin

Number of Messages : 515
Point : 1210
Registration Date : 2017-11-27

http://freesbc.yetkinforum.com

freedomhtx likes this post

Back to top Go down

Freesbc and CUCM Empty Re: Freesbc and CUCM

Post by freedomhtx Wed Nov 04, 2020 5:58 pm

Hi there, yes the trunk on the CUCM is set to connect to the LAN port of the SBC. I was able to get a trunk connected to asterisk before but im not sure if im missing a setting in SBC for registration.

freedomhtx

Number of Messages : 4
Point : 8
Registration Date : 2020-11-04

Back to top Go down

Freesbc and CUCM Empty Re: Freesbc and CUCM

Post by freedomhtx Wed Nov 04, 2020 6:46 pm

Ok so an update, I was able to get the outgoing calls to work between the sbc anc CUCM however I am unable to get the incoming calls from twilio to connect to the SBC. This is the error that I am getting from twilio. "Request timeout with sip:+17138448443@external-ip"

freedomhtx

Number of Messages : 4
Point : 8
Registration Date : 2020-11-04

Back to top Go down

Freesbc and CUCM Empty Re: Freesbc and CUCM

Post by Admin Thu Nov 05, 2020 2:19 am

Hi
Please use tbsigtrace tool to collect signaling capture and check with Wireshark if you are sending/receiving the correct packets.

https://docs.telcobridges.com/tbwiki/Toolpack_Debug_Application:Tbsigtrace

If you still cannot address the problem please contact us at support@telcobridges.com

Admin
Admin

Number of Messages : 515
Point : 1210
Registration Date : 2017-11-27

http://freesbc.yetkinforum.com

Back to top Go down

Freesbc and CUCM Empty Re: Freesbc and CUCM

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum