Twilio TLS

[herbertshades]

Has anyone been able to connect ProSBC to Twilio via tls. Plain SIP on port 5060 works. Getting tls to work per instructions on
https://docs.telcobridges.com/tbwiki/Create_A_SIP_Certificate_A and on youtube, I just can't get calls to work inbound into ProSBC.

Does anyone have this working?

[Admin]

Hi

Please try disabling Require peer authentication option under the TLS Profile. You can use tbsigtrace capture to check the traffic between your sbc and Twilio.

https://docs.telcobridges.com/tbwiki/Toolpack_Debug_Application:Tbsigtrace

[herbertshades]

tbsigtrace shows that the calls are coming in from Twilio into port 5061, from random ports. I don't think that is a problem however. ProSBC responds with a 100 Trying then with a 488 Not Acceptable Here and Twilio ACKs that 488. The IP addresses are all good in the Access Control List.

I have another provider that is coming in on port 5061 (tls), from random ports, and those calls work just fine. Same TLS Profile, with disabled Require Peer Authentication.

[Admin]

Hi

Please go to the following link and send logs to support@telcobridges.com

https://docs.telcobridges.com/tbwiki/FreeSBC_Troubleshooting#Log_procedure_for_Signaling.2FRouting_problems

[Sponsored content]